Dynaudio 455520 - Handbuch (Seite 6)

06 confidence_Dynaudio UNPACKING
UNPACKING THE LOUDSPEAKERS
All the Confidence models are protected during transit via a stable and
secure packaging. Due to their weight and dimensions, the C2 and C4
models are shipped in a special wooden transport crate. Please consult your
trained Dynaudio Confidence dealer for assistance to avoid any damage
when unpacking your new Confidence. To unpack the floor standing
Confidence properly, two people are recommended in order to avoid perso-
nal injuries or product damage.
Unpacking instructions for the crated floor standing models are listed
below:
1. Lay the transport box flat on the floor.
2. Remove the screws along the top plate.
3. Remove the top plate and the five safety pads.
4. Remove the screws along the bottom plate.
5. Carefully lift the sidewall frame.
6. Carefully remove the loudspeaker by lifting it up
horizontally.
7. Turn the loudspeaker and slowly place it on its plinth.
8. Remove the wrapping foil by lifting it on one end and unwrap it in
a clock-wise motion. Do not use blades, cutters or any other sharp
objects that will destroy the foil.
9. Fix the sidewall frame on the bottom plate again.
10. Place the wrapping and the safety pads back into the box and
close the plate.
The wooden transport crates of the C2 and C4, and custom cartons of
the C1 and Center are intended for long-term use and should be used
whenever the loudspeakers are to be transported, and as such they should
be stored for future use.