Dynaudio IP 24 - Handbuch (Seite 17)

17
Installation Guide
10
12
Congratulations.
Installation is complete.
Insert the grille by pressing it
carefully in the gap between frame
and baffle. Don’t press in the middle
of the grille.
Tighten the 10 pcs. screws, using
torx 20 bit. (Screws from step 2) 10
11
12
Position the baffle with top end first.
Make sure not to damage the spea-
ker wire. 9
8
Put the foam on the backside in
correct position.
Connect the speaker terminal with
the amplifier. Make sure the ampli-
fier is switched off. 7
8