Xoro HRS 9190 LAN - Handbuch (Seite 55)

ENG 11
you press OK on a playing channel.
10. Multi Pic Loop: Set the loop of multi pictures off or on.
11. Recall List: You can turn Recall List on or off. If you set ON, when you press
Recall button of RCU you can get the recall list. If you set OFF, when you press
recall button you can go back to the last program you have viewed.
12. Eco-Standby: Set this Setting to ON to reduce the power consumption in
Standby Mode.
13. Front Panel Light: Set the brightness of the LED-Display.
6.2 Audio/Video & OSD
Menu->SETTINGS->Audio/Video & OSD Setup
1. Digital Audio: If you set PCM, all supported Audio Formats are decoded by the
Set Top Box and output as PCM Stereo. If you select RAW, the Set Top Box will
output Dolby Digital Audio as a Bitstream - an external Dolby Decodes is required in
this case.
2. Menu Transparency: Set the transparency of all menus.
3. TXT Transparency: Set the transparency of teletext.
4. Display Mode: Set the HD format between 1080p, 1080i, 720p, 576i or 576p.
5. TV Type: Set the TV Type on PAL/NTSC state.
6. Screen Mode: Set the display format according to the screen ratio. Select TV
screen mode either 4:3 or 16:9 according to the TV type, or press the MODE button
of RCU directly.
7. OSD Timeout: Set the display time of the program information.
8. Scart Output：While the HDMI Mode is set to 576i or 480i mode, you can
change the scart output mode between CVBS and RGB mode.
6.3 Parental control
Menu-> SETTINGS ->Parental Control