Parkside PDS 290 A1 - Handbuch (Seite 5)

6 GB/IE
Delta sander PDS 290 A1
Q
Introduction
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools
correctly. To help you do this please read the accom-
panying operating instructions. Keep these instructions
in a safe place. If you pass the device on to anyone
else, please ensure that you also pass on all the
documentation.
Q Proper use
The device is intended for dry sanding of wood,
plastic, metal, filler and painted surfaces. The device
is particularly suitable for corners, profiles or difficult
to access places. Any other use or modification to
the device shall be considered as improper use and
could give rise to considerable dangers. We will
not accept liability for loss or damage arising from
improper use. Not suitable for commercial use.
Q Features and equipment
1 ON / OFF switch
2 Oscillation speed setting wheel
3 Mains lead
4 Dust extraction spout
5 Ventilation openings
6 Backing plate (360° rotatable)
7 Adapter for external vacuum extraction
8 Reducer piece
Q
Included items
1 Delta sander PDS 290 A1
3 Sanding sheets
1 Adapter for external vacuum extraction
1 Reducer piece
1 Operating instructions
Q Technical information
Nom. power input: 290 W
Rated voltage: 230 V~ 50 Hz
Nominal speed: n
0
6000 - 11000 min -1
Nom. oscillation speed: n
0
12000 - 22000 min -1
Backing plate: 360° rotatable
Protection class:
Introduction
The following pictograms are used in these operating instructions / on the device:
Read instruction manual! Safety class II
Observe caution and safety notes!
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Caution – electric shock!
Danger to life!
Keep children away from electrical
power tools!
Explosive material!
Risk of loss of life by electric shock
from damaged mains lead or mains
plug!
V~
Volt (AC)
Dispose packaging and appliance in
an environmentally-friendly way!
W
Watts (Effective power)
61649_par_Dreieckschleifer_content_LB6.indd 6 07.01.11 10:42