Parkside PP 1050 A1 - Handbuch (Seite 2)

DE/AT/CH
Technical Data
Toy drill: PP 1050 A1
For batteries
2 x 1.5 V , R6, AA (Mignon) (not included in scope of delivery)
We recommend using only batteries and not accumulators.
Features and fittings / play function
This article is toy imitation of a tool with functions suitable for
children.
1 1–2 gear switch: changes the rotation speed
2 Battery compartment
3 Screw battery compartment
4 ON / Off switch switches the device on
5 Anticlockwise / clockwise: changes the direction of rotation
6 Selection switch; creates „rattling noises“
7 Handle
8 Wing bolt
9 Bit: creates drilling noises
10 LED: lights up
General Safety Instructions
Check the toy regularly for signs of damage (like damage at
contacts or on the housing, leaking batteries etc.). If you
detect any damage, the toy may no longer be used.
gB
gB gB
gB
Cleaning
Never immerse the device in water or other liquids.
Remove the batteries from the device prior to cleaning.
Clean the device using a slightly moist cloth. Do not use any
type of cleaning agent.
Clean the inside of the battery compartment only with a dry
duster.
Disposal
Return the packaging to a local recycling facility.
Return the device to a local recycling facility.
Contact your local authorities for information on how to dispose
of the product at the end of product life.
Disposal of the batteries!
Never dispose of batteries in your household waste.
Return batteries to the recycling facilities offered.
General safety notes concerning batteries
Single use, non-rechargeable batteries must never be re-
charged.
Rechargeable batteries must always be recharged under
adult supervision.
Rechargeable batteries must be removed from the toy be-
fore they are recharged.
Unequal batteries types or new and used batteries may not
be used together.
Batteries must be inserted in compliance with the correct
polarity.
Empty batteries must be removed from the toy.
Do not allow the connection terminals to short circuit.
Removing and inserting the batteries
ATTENTION! An adult must replace the batteries.
Loosen the battery compartment screw using a screwdriver 3 .
Remove the battery compartment cover and insert the new
batteries.
Ensure correct polarity. This is shown in the battery com-
partment.
Screw on the battery compartment cover.
ATTENTION! Only use the device with the battery compartment
cover screwed on.
Reinigung
Tauchen Sie das Gerät niemals in Wasser oder in andere
Flüssigkeiten.
Entfernen Sie vor der Reinigung die Batterien aus dem Gerät.
Reinigen Sie das Gerät mit einem leicht angefeuchteten
Tuch. Verwenden Sie keine Reinigungsmittel.
Reinigen Sie das Innere des Batteriefachs nur mit einem
trockenen Staubtuch.
Entsorgung
Geben Sie die Verpackung über die angebotenen
Sammeleinrichtungen zurück.
Geben Sie das Gerät über die angebotenen
Sammeleinrichtungen zurück.
Möglichkeiten zur Entsorgung des ausgedienten Produktes
erfahren Sie bei Ihrer Gemeinde.
Entsorgung der Batterien!
Batterien dürfen nicht über den Hausmüll entsorgt werden.
Geben Sie Batterien über die angebotenen Sammeleinrichtungen
zurück.
Toy drill PP 1050 A1
Introduction
We congratulate you on the purchase of your new appliance. You
have chosen a high quality product. The operating instructions
are part of the product. They contain important information
concerning safety, use and disposal. Before using the product,
familiarise yourself with all the operating and safety instructions.
If you pass the product on to anyone else, please ensure that you
also pass on all the documentation with it.
Intended use
ATTENTION! NOT SUITABLE FOR CHILDREN
UNDER 3 YEARS OLD: CONTAINS SMALL
PARTS WHICH MAY REPRESENT A CHOKING
HAZARD! DANGER OF SUFFOCATION!
ATTENTION! Cords / wires / polystyrene parts / foil / tapes /
clips / tags, loops, which have been used to secure the toy in
its packaging for transport, are not part of the toy and must
be removed before children are allowed to play with the toy.
Scope of delivery
1 Toy
1 Set of operating
instructions
Hello! My
name is Peter
Parkside!