Parkside PBS 600 A1 - Handbuch (Seite 26)

26 GB
Introduction / General power tool safety warnings Introduction
Belt sander PBS 600 A1
Q
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product.
The instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as descri-
bed and for the specified applications. If you pass
the product on to anyone else, please ensure that
you also pass on all the documentation with it.
Q Proper use
The belt sander - depending on the sanding paper
used - is designed for dry sanding wood, plastic,
metal and putty, as well as painted surfaces. The de-
vice may only be used for dry sanding. Always use
a sanding belt and grade of grit suitable for the par-
ticular surface you are sanding. The speed selected
should also be appropriate for the material. The de-
vice is not intended for commercial use. Any other
use or modification to the device shall be considered
as improper use and could give rise to considerable
dangers. The manufacturer will not accept liability for
loss or damage arising from improper use.
Q
Features and equipment
1 Belt speed adjuster wheel
2 Recesses for clamp mounting
3 ON / OFF switch
4 Lock button for ON / OFF switch
5 Dust box
6 Release button for dust box
7 Belt adjuster screw
8 Sanding belt
9 Adapter port
10 Tensioning lever for sanding belt
11 Clamps
12 Adapter for external vacuum extraction
13 Reducer piece
Q Included items
1 Belt sander PBS 600 A1
1 Sanding belt
1 Dust collection box
1 Vacuum extraction adapter and reducer piece
(for external vacuum extraction)
2 Clamps
1 Operating instructions
Q Technical information
Belt sander PBS 600 A1
Nominal voltage:
230 V~ 50 Hz
Nom. power input: 600 W
No-load belt speed: 170–250 m / min
Sanding belt:
75 x 457 mm
Protection class: II /
Noise and vibration data:
Measured values for noise are determined in accor-
dance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level: 76.1 dB(A)
Sound power level: 87.1 dB(A)
Uncertainty K:
3 dB
Wear ear protection!
Total vibration, EN 60745:
Vibration emission value a
h,W
= 5.79 m / s 2
Uncertainty K = 1.5 m / s 2
Rear handle: a
h,W
= 4.22 m / s 2
Front handle: a
h,W
= 5.79 m / s 2 ,
K = 1.5 m / s 2
The vibration level specified in
these instructions was measured in accordance with
an EN 60745 standardised measurement process
and can be used to compare equipment. The vibra-
tion emission value specified can also serve as a
preliminary assessment of the exposure.
The vibration level will change according to the ap-
plication of the electrical tool an in some cases may
exceed the value specified in these instructions. Re-
gularly using the electric tool in such a way may
make it easy to underestimate the vibration.