Aquapur ADR 1300 B3 Handheld Steam Cleaner - Handbuch (Seite 13)

10 ADR 1300 B3
GB
IE
CY
Cleaning
RISK OF ELECTRIC SHOCK
► Always remove the plug from the mains power socket before you clean the
appliance.
► Under no circumstances may you immerse the appliance in water
when cleaning it, or hold it under running water.
WARNING - RISK OF INJURY!
► Allow the appliance to cool down before cleaning it!
WARNING - PROPERTY DAMAGE!
► Do not use abrasive, aggressive or chemical cleaning agents! They could
irreparably damage the upper surfaces!
1) Remove the plug from the mains power socket.
2) Allow the appliance to cool down.
3) Empty the water tank 3.
4) Clean the appliance, the water tank 3 and the accessories with a moist
cloth. For stubborn soiling use a mild detergent on the cloth.
Scale removal
1) Place descaler suitable for household appliances with water into the water
tank 3. Pay heed to the instructions given by the manufacturer of the descal-
er. Never fi ll the water tank 3 with more water than to the MAX marking.
2) Place the switch “Anti-calc Function” 4 at the position “I”.
3) Replace the water tank 3 back onto the appliance.
4) Remove the tip of the steam nozzle 0, in that you use a coin or similar to
unscrew the tip.
5) Insert the plug into a mains power socket.
6) Hold the appliance over a sink and press and hold the steam lever 1 down.
After a short time (about 1.5 minutes) hot water drips from the steam nozzle 0
and fl ushes the dissolved limestone and soiling out of the appliance.
7) When the water from the water tank 3 is depleted and there is no more water
in the appliance, release the steam lever 1. Check to ensure that the water
with the descaler is completely used up. For this, tilt the appliance forwards.
8) Remove the plug from the mains power socket.
9) Remove the water tank 3 and place the switch “Anti-calc Function” 4 at the
position “O”
10) Wait until the appliance has cooled down and then screw the tip of the
steam nozzle 0 back onto the appliance.