Auriol H14044 - Handbuch (Seite 2)

GB/IE/CY FI GB/IE/CY GB/IE/CY GB/IE/CY GB/IE/CY GB/IE/CY
LCD-kello + kynäkotelo
Q Johdanto
Tutustu laitteeseen ennen ensimmäistä käyttöönottoa. Lue sitä
varten tämä käyttöohje ja turvallisuusohjeet. Käytä laitetta aino-
astaan kuvatulla tavalla ja mainitussa käyttötarkoituksessa.
Säilytä käyttöohje huolellisesti. Anna kaikki asiakirjat laitteen mukana
mahdolliselle uudelle omistajalle.
Q määräystenmukainen käyttö
Tämä tuote on tarkoitettu kellonajan, päiväyksen, viikonpäivän sekä senhet-
kisen sisälämpötilan lukemiseen. Tuotteessa on hälytys- ja countdown -toi-
minto. Lisäksi tuote on tarkoitettu kirjoitusvälineiden säilyttämiseen. Tuotetta
ei saa käyttää muulla kuin edellä kuvatulla tavalla eikä sitä saa muuttaa. Se
voi aiheuttaa loukkaantumisia ja / tai tuotteen vanhinkoitumista. Valmistaja
ei vastaa virheellisestä käytöstä johtuneista vahingoista. Tuote ei ole tarkoi-
tettu ammattimaiseen käyttöön.
Q Osien kuvaus
1 Kynäboxi
1a Ura
2 LC-näyttö
To help protect the environment, please dispose of the product
properly when it has reached the end of its useful life and not in
the household waste. Information on collection points and their
opening hours can be obtained from your local authority.
Defective or used batteries have to be recycled in line with Directive
2006 / 66 / EC. Return batteries and / or the device via the recycling
facilities provided.
Batteries should not be disposed of in normal
domestic waste!
EMC
Product description:
Pen Pot Clock
Model No.: H14044
Version:
04 / 2010
Last Information Update: 01 / 2010
Ident no.: H14044012010-3
Q Setting °C/°F
j Press the set-up button 5 to set °C or °F.
Q Switching the sound on/off
j Press the decrease button 3 to switch the sound on or off.
NOTE: When you have switched the sound on, all 9 alarm sequences will
play in turn.
Q Cleaning and Care
j Use a dry, non-flutting cloth to clean the produkt.
j Do not under any circumstances use corrosive or abrasive cleaning
agents. Otherwise the surface of the product can be damaged.
Q Disposal
The packaging is made entirely of recyclable materials, which
you may dispose of at local recycling facilities.
Contact your local refuse disposal authority for more details of how to dis-
pose of your worn-out product.
Q Setting a birthday
NOTE: Press the decrease button 3 or the increase button 4 to make
adjustments in the various modes.
j Press the mode button 7 three times to get to the birthday reminder
mode.
j Press the set-up button 5 in order to be able to set the hours.
j Press the set-up button 5 in order to be able to set the minutes.
j Press the set-up button 5 in order to be able to set the year.
j Press the set-up button 5 in order to be able to set the month of the
birthday.
j Press the set-up button 5 in order to be able to set the date of the birthday.
j Press the mode button 7 twice to return to the normal mode.
NOTE: On the time and day set for the birthday, a birthday song will
sound for 5 minutes.
Q Setting/starting the countdown
NOTE: Press the decrease button 3 or the increase button 4 to make
adjustments in the various modes.
j Press the mode button 7 four times to get to countdown mode.
j Press the set-up button 5 in order to be able to set the hours.
j Press the set-up button 5 in order to be able to set the minutes.
j Press the set-up button 5 in order to start the countdown.
j Press the mode button 7 once to return to the normal mode.
NOTE: When the set time has expired, an alarm will sound for 1 minute.
Q Setting the alarm
NOTE: Press the decrease button 3 or the increase button 4 to make
adjustments in the various modes.
j Press the alarm button 6 to get to the alarm mode. Or you can press
the mode button 7 twice to get to the alarm mode.
j Press the set-up button 5 in order to be able to set the hours of the
time you wish to set the alarm for.
j Press the set-up button 5 in order to be able to set the minutes of the
time you wish to set the alarm for.
j Press the set-up button 5 to be able to select one of 9 different alarms.
j Press the mode button 7 three times to return to the normal mode.
Q Switching the alarm on/off
Switching the alarm on:
j Press the increase button 4 to switch the snooze function on.
NOTE: The snooze function is only active when the alarm is also switched on.
Switching the alarm off:
j Press the increase button 4 again to switch the snooze function off.
NOTE: At the set time, the alarm will sound for 1 minute.
NOTE: If the snooze function is on, you can press any button 3 , 4 , 5 ,
6 , 7 to repeat the alarm every 3 minutes for a maximum of four times.
The alarm will sound every 3 minutes.
adjustments in the various modes.
Tip: Hold the button in question down. This way, you can speed up the
adjustment of the values you wish to set. This rapid set-up process can be
used for all adjustment procedures. If you do not press any buttons within
60 seconds, the LC display will automatically return to the standard display.
Q Setting the 12/24-hour mode
j Press the mode button 7 once to get to the selection range of the
12/24-hour mode.
j Press the decrease button 3 or the increase button 4 to set the
12 or 24-hour mode.
j Press the mode button 7 four times to return to normal mode.
Q Setting the time/date
NOTE: Press the decrease button 3 or the increase button 4 to make
adjustments in the various modes.
j Press the mode button 7 once to get to the 12 or 24-hour selection
range.
j Press the set-up button 5 in order to be able to set the hours.
j Press the set-up button 5 in order to be able to set the minutes.
j Press the set-up button 5 in order to be able to set the year.
j Press the set-up button 5 in order to be able to set the current month.
j Press the set-up button 5 in order to be able to set the current date.
j Press the mode button 7 four times to return to the normal mode.
j Insert a new battery into the battery compartment 11 , ensuring correct
polarity.
j Replace the battery compartment lid 10 onto the battery compartment
11 and press it firmly down. You should feel and hear it click into place.
Q Operation
j Pull the LCD clock 8 out of the pen holder 1 .
j Pull the insulating strips out of the battery compartment in order to start
up the LCD clock
8 . A 6-second sequence will sound.
j Push the LCD clock 8 into the pen holder 1 . Make sure that the slot
1a of the pen holder 1 grips the guide rails 8a of the LCD clock 8 .
NOTE: The LCD clock 8 has various modes:
Normal mode: The time, data and ambient temperature are displayed
12/24-hour mode: 12/24-hour mode can be chosen and time and
date set.
Alarm mode: You can set a time for the alarm to go off.
Birthday reminder mode: The alarm can be set to remind you of
someone‘s birthday.
Countdown mode: You can set a countdown of a maximum of
23 hours and 59 minutes.
NOTE: Press the decrease button 3 or the increase button 4 to make