Auriol AUB 2 A1 Benutzerhandbuch
Seite 14
Watch winder AUB 2 A1
12 - English
Turning on/off the watch winder
You then turn on the watch winder using the on/off switch (11) at the rear of the watch winder.
Some automatic watches do not have a so-called slipping clutch to protect
against overwinding. If you are unsure whether your watch may be wound in
the watch winder, consult a watchmaker or the shop where you purchased the
watch before using the device. There is a risk of damage to your watch.
We assume no liability for damaged watches.
Programme sequence
Depending on the selected combination of rotation direction and speed, the watch winder
proceeds via a defined programme sequence after it is turned on. This always consists of a
movement phase, followed by a pause. The selected programme sequence starts again after about
an hour.
Refer to the following tables for the programme sequences that can be set:
Rotation direction selector (12) is in position
Rotation speed
selector (3)
Rotations Pause
OFF
No rotation
No rotation
1
13-16 rotations in a clockwise direction,
then pause.
Approx. 1 hour
2
34-40 rotations in a clockwise direction,
then pause.
Approx. 1 hour
3
43-51 rotations in a clockwise direction,
then pause.
Approx. 1 hour
4
86-101 rotations in a clockwise direction,
then pause.
Approx. 1 hour