Crivit Z31982 - Handbuch (Seite 4)

4 GB/IE/CY
Keep exits clear. Do not block the exit with
objects.
Make sure you know the fire precaution
arrangements on the site.
Take note of the effects of the weather
and climate
When selecting the location to put up your
tent, you should always consider the local
situation and how this might change. Will the
terrain turn into a lake if it rains? Please take
into account any rising rivers and incoming
tides.
Protect the product against strong wind and
storms. Place the product in a location that is
protected from the wind if possible.
If a strong wind is forecast, replace the
normal tent pegs with special storm pegs.
You can find information about meaningful
supplementary products at specialist shops.
The tent should be taken down before heavy
snowfall or stormy weather.
Remove any snow directly from the product.
Otherwise the product may collapse under
the weight.
Ensure that the tent is not too taut when it
is erected, otherwise it may not be able to
adapt to changing weather conditions and
might be damaged.
Zips are wearing parts and do not fall under
the guarantee conditions.
The polyester material of the tent consists of
water-repellent material.
It is possible that during the first rainfall
the tent will not be completely watertight.
However, the threads of the tent will contract
when exposed to water so that after a short
time the tent will become watertight.
When exposed to moisture and rain, tent
fabrics expand to varying degrees and
make it necessary to adapt the length of
the guy lines. If the material becomes taut
again while drying, the guy lines have to be
loosened again in good time.
Do not use any insect spray in or on the tent.
Small leaks on the seams can be repaired
with a seam spray and impregnation spray
can be used for the tent skin.
§
Assembly
Please ensure that the product is only assembled/
disassembled by a competent person.
§
Erecting the tent
ATTENTION: Please note that the poles are
under tension and snap into the natural shape of
the tent. Taking care that the release of tension
does not cause any injury.
Remove the rubber band and throw the
product away from you into the air.
§
Folding the tent
Please see a video using our QR code that
demonstrates how to fold away and packing the
tent.
Grab all the loops together in one of your
hands. Start at the rear end in order to allow
the air escape completely through the front
entrance (see fig. A–B).
Keep the four loops gathered in one hand
and put the tent into an upwards position
(see fig. C).
Press the tip of the upper loop towards the
ground and move it towards the middle.
Keep pressing downwards the new loops
with one hand while the other hand keeps
holding the other four loops together
(see fig. D–E).
Loose the grip of the hand that holds the
4 loops and fold all loops into each other
(see fig. F–G).
Align the loops and secure the folded tent
with the elastic strap (see fig. H–I). You can
now store the tent in its bag.
96427_14_Crivit_GB_IE_DK_SI_CY_02.indb 4 13/12/13 10:09 am