Crivit Z29745 - Handbuch (Seite 3)

3 GB/IE/CY
Introduction / Safety advice / Assembly
Beach shelter
Q Introduction
Familiarise yourself with the product prior to assembly. Carefully
read the following assembly instructions and safety tips. Only use
the product as instructed and only for the indicated field of appli-
cation. Keep instructions in a safe place. Submit all documents to a third party
if distributing the product.
Q Proper Use
This product is intended for use as protection against the wind and sun. The
material of the beach shelter is not watertight over a prolonged period. It
should not therefore be used in the rain. Any use other than that described or
any modification of the product is not permissible and may result in injury
and / or damage to the product. The manufacturer is not liable for damage
caused by improper use. The product is not intended for commercial use.
Q Description of parts and features
1 Pole ø 7 mm, approx. 3650 mm
2 Pole ø 7 mm, approx. 1850 mm
3 Tarpaulin
4 Guy line
5 Tent peg
Q Dimensions and material
The measurements can be taken from Figure I.
Material: 100% polyester
Q Included items
1 x tarpaulin
1 x pole ø 7 mm, approx. 3650 mm
2 x poles ø 7 mm, approx. 1850 mm
4 x guy lines
8 x tent pegs
1 x carrying bag
1 x assembly instructions
Safety advice
J WarnIng!
rISK OF LOSS OF LIFE Or aCCI-
DEnT TO InFanTS anD CHILDrEn! Never leave chil-
dren unsupervised with the packaging material or the product.
The packaging material presents a suffocation hazard and there is a risk
of loss of life from strangulation. Children often underestimate danger.
Always keep the product out of reach of children.
m CaUTIOn! rISK OF InJUrY! Ensure that all parts are undamaged
and have been assembled appropriately. Risk of injury exists if assembled
incorrectly. Damaged parts can effect safety and function.
m CaUTIOn! Do not leave children unattended. The product is not a
climbing frame or toy. Make sure that nobody climbs or leans on the
product, particularly children. The product could become imbalanced
and tip up. This may result in injury and/or damage.
m CaUTIOn! rISK OF InJUrY! Never under any circumstances
assemble the product in a strong wind.
J Select a piece of land that is as flat and firm as possible to erect your tent.
J Sandy surfaces reduce the stability of the tent. Please ensure that the
surface provides a firm hold for the tent pegs.
J Never knock the tent pegs into the ground with force! If necessary, the
guy lines should only be extended with the help of a loop and the tent
peg positioned in a different location.
J The intactness of all connection points and the guy lines should be
checked regularly, as should the firmness of the tent pegs in the ground.
J If the tent is erected in the wrong order, this may cause damage to the
tent. All liability is excluded in such cases.
m CaUTIOn! DangEr OF POISOnIng anD DaMagE TO
PrOPErTY! Do not light any fires within the product and keep it away
from sources of heat.
J It is not recommended to take away any sewn label.
J Please familiarise yourself with the local fire protection regulations.
Take note of the effects of the weather and climate
J When selecting the location to put up your tent, you should always
consider the local situation and how this might change. Will the terrain
turn into a lake if it rains? Please take into account any rising rivers and
incoming tides.
J Protect the product against strong wind and storms. Place the product in
a location that is protected from the wind if possible.
J Please ensure that the beach shelter is not too taut when it is erected, as
otherwise it will not be able to adapt to changing weather conditions
and may be damaged.
J Zips are wearing parts and do not fall under the guarantee conditions.
J Do not pull the tent pegs out of the ground together with the rings or by
the guy lines.
J Do not use any insect spray in or on the beach shelter.
J You should never wash the beach shelter in the washing machine or with
chemical cleaners.
J Always store the beach shelter in a dry location, as otherwise the fabric
may become damaged and rust patches occur on the zips and poles.
J Replace damaged poles or other structural parts by new ones.
J Small leaks on the seams can be repaired with a seam spray and im-
pregnation spray can be used for the tent skin.
Q assembly
Tip: If possible you should familiarise yourself with the construction of your
beach shelter and erect it before using it for the first time. Check that all parts
are present and in perfect condition.
Q Selecting a Pitch
The ground should be flat, clean and free of unevenness. Remove any
pointed or sharp-edged objects beforehand (e.g. stones, twigs etc.). Please
ensure that the beach shelter is positioned in such a way that the open side
is protected against the wind.
j Note that it is not permitted to erect beach shelters everywhere.
Please consult local bylaws in this respect.
j When selecting the site to erect the beach shelter, please remember that
you require space for the guy lines 4 in addition to the base area for
the beach shelter. You should also ensure that there is also enough space
to walk around the beach shelter and that there are no tripping hazards.
j Please keep a sufficient distance from other beach shelters.
Q Erecting the Beach Shelter
j Please ensure that the product is only assembled by skilled individuals.
j Assemble the product in accordance with illustrations A to H.
Illustration a:
1. Place the tarpaulin
3 flat on the ground. The channels for the poles 1
and 2 must be facing upwards.
Tip: If it is windy fix the tarpaulin 3 in place in the ground with the help
of the tent pegs 5 .