Florabest H14335 - Handbuch (Seite 16)

16 GB/IE
... / Cleaning and care
updated value. Insert the humidity sensor
deeply into the soil and wait a little time
to allow the water to percolate through
the soil and reach the soil sensor
5 .
= The moisture content of the soil
is less than anticipated.
= The composition of the soil can detrimen-
tally affect the readings.
= Do not insert the humidity sensor into very
heavy or coarse soils (e.g. loam or sand).
= There may be voids in the soil.
= Remove the humidity sensor and reinsert
it in another location.
= The soil sensor 5 is not inserted deeply
enough into the soil.
= Insert the humidity sensor further into the
soil (in a plant pot: 2 / 3 of the pot depth),
maximum up to the insertion limit
2 .
= The metal rods of the soil sensor 5 are
dirty.
= Clean the metal rods carefully.
Q 
Cleaning and care
j  Clean the product with a dry, fluff-free cloth.
If necessary, use a narrow brush as well.
j  Use a moist cloth and if necessary a mild
detergent to remove stubborn dirt.
j  Do not use corrosive or abrasive cleaning
agents. Otherwise damage to the product
may occur.
®