Florabest Granite Parasol Stand - Handbuch (Seite 6)

6 GB/IE
Assembly / Storage and Care / Service / Disposal
Insert the screw with spring ring, washer and
rubber washer 1 into the base from below.
Use the centre hole. Please note the position
of the washers (see Fig. A)!
Place the large rubber washer 2 over the
screw protruding at the top (see Fig. B).
Secure the screw 1 from below using a socket
key and place the stand tube 3 onto the
screw 1 from the top, and slightly screw in.
Align the rubber washer 2 below the stand
tube 3 . Tighten the stand tube 3 with the
socket key (see Fig. C).
Note: The clamping plate 4 is premounted
to protect the umbrella pole (see Fig. D).
Please do not remove.
Using inserts
Use the inserts 5 to match the size of your
umbrella pole.
Insert the necessary inserts 5 in the stand
tube 3 . The groove of the respective insert is
intended to leave room for the clamping plate 4
(see Fig. E).
Insert the patio umbrella. Firmly secure the
wing bolts 6 (see Fig. F).
Storage and Care
The granite stand is maintenance-free.
If necessary, remove any dirt with warm soapy
water.
Retighten screws as necessary.
Store granite stand in a dry location during
periods of non-use, e.g. over winter.
Stainless steel parts:
Please treat the stainless steel tube with an
automotive chrome care product or stainless
steel care lotion as necessary.
Service
SunRain Handels GmbH
Bahnhofstrasse 63
A-4910 Ried-Austria
[email protected]
IAN 96711
Granite Parasol Stand
square
IAN 96713
Granite Parasol Stand
round
For all inquiries about your product, please have
your receipt and the article number (e.g. IAN
12345) ready as your proof of purchase.
Disposal
The packaging is made of environmentally friendly
materials, which may be disposed of through your
local recycling facilities. Please dispose of this
product at the end of it‘s useful life.