Melinera Z31120A Z31120B - Handbuch (Seite 8)

8 GB/IE
C
d
Never open any of the electrical parts or insert any
kind of object into them.
Protect the mains cable from sharp edges, mechanical
loads and hot surfaces.
Do not install with sharp fasteners or nails.
Always unplug the mains adapter
2 from the socket
before installation, dismantling or cleaning.
Never touch the light chain 1 plug or the light chain 1
itself with wet hands.
The light chain 1 must not be electrically connected
to another light chain.
If the light chain 1 is not in use for any length of time
(e.g. holidays), disconnect them from the power supply.
If you have any questions about the product or are
unsure about any of its aspects, please seek the advice
of an electrical equipment specialist.
Use
Note: The LED bulbs are connected in series. If one LED
bulb is defective, up to eight (Z31120 A) or ten
(Z31120B) LED bulbs may not light up.
Insert the supply line plug into the socket of the mains
adapter 2 . Turn clockwise tighten the union nut.
Plug the mains adapter 2 into the socket.
The lights are now switched on.
To switch the lights off, disconnect the mains adapter
2
from the socket.