Melinera Z30171 - Handbuch (Seite 7)

9 GB/IE Melinera ®
Safety Information / Use
 The string lights must not be electrically connected to another
set of lights.
 Use
Note: The light set has 6 parallel wires, each with five small light
stars
2 and one large light star 1 . The distance between the
wires is approx. 16 cm.

Mount the small light stars 2 on to the sockets of the bulbs.
 Use the supplied suction cups 4 to hang up the light set.
 Insert the plug on the end of the light set into the socket of the
mains adapter
3 . Secure the connection by pushing the
clamping nut on the lead over the plug and screwing it on to
the mains adapter.

Insert the mains adapter 3 into the mains socket. The light set
is now switched on.

Pull the mains adapter 3 out of the mains socket to switch off
the light set.
Note: The bulbs are connected in series. If one bulb is defective,
then all the bulbs of one wire may not light up.
 Replacing a bulb
 Do not attempt to replace a bulb in the large light stars
1 .
They are LEDs and cannot be replaced.

Pull the mains adapter 3 out of the mains socket.
 Allow the bulb to cool for at least five minutes.
_mel_Sternen_Lichterkette_content_#" 28.06.10 14:19