Miomare Multi-Function Shower Head Set - Handbuch (Seite 2)

GB GB GB
Guarantee and Service
The warranty period is three years and begins on the day of purchase. Please
keep your receipt as proof of purchase.
During the warranty period defective hand shower sets can, after contact with
the service, be sent to the Service address given with the carriage costs charged
forward. You will then receive a new one or a repaired unit free of charge.
After the warranty period has expired, you can similarly send the defective
product for repair to the address given. Repairs made after expiration of
warranty are subject to a fee.
This warranty does not limit your legal rights.
If you have any queries or faults with the product, please contact the following
Service address:
GB
Eisl Sanitär GmbH
Mattseer Landestraße 8
A-5101 Bergheim
Tel.: 00800-87934629*
Tel.: +43-662-879346-29
Fax : +43-662-879346-50
E-Mail: [email protected]
* Free of charge number
IAN 90051
For all inquiries about your product, please have your receipt and product
number (e.g. IAN 12345) ready as your proof of purchase.
By twisting the ring for the setting of the water jet 2 of the hand shower
head 1 , you choose the desired water jet variation.
Note: It is advisable, not to adjust the massage jet too very powerful
when showering delicate parts of the body.
Maintenance and Cleaning
Please note that chromed surfaces require special care and attention. Therefore,
please follow the instructions:
When cleaning, never use petrol, solvents, aggressive cleansers or hard
cleaning brushes etc. These could damage the surface of the product.
Dry your shower head with a cloth after every use in order to avoid the
possible build-up of limescale.
Clean the product with a damp, soft cloth and a mild cleaning agent if
required.
Regularly move the anti-limescale soft jets and in doing so remove any
limescale deposits.
It must be expected that non-observance of the above care advice will
result in damage to the surfaces of the product. In this event your rights
under the warranty may be invalidated.
Disposal
The packaging is made of environmentally friendly materials, which
may be disposed through your local recycling facilities.
Contact your local refuse disposal authority for more details of how to dispose
of your worn-out product.
Assembly
Note: Familiarise yourself with the product prior to assembly. Carefully read
the following assembly instructions and safety advice. In the event of incorrect
installation, all warranty claims – particularly in relation to subsequent damage
– are excluded.
Please ensure that the stopcock for the tap is turned off.
ATTENTION when working on hand showers that already have a water
stop function.
Otherwise there is a danger of injury and / or damage to objects.
Follow these steps:
Disconnect the old shower hose from the shower connector 3 of your tap.
Screw one of the conical connectors of the shower hose 4 by hand to the
shower connector 3 of your tap, and the second conical connector of the
shower hose 4 to the hand shower head 1 .
Start-up
After the initial installation, carefully check all connections for leaks.
Operation
Your new hand shower head is equipped with various water jet variants (see
Fig. B).
The water jet can be adjusted from gentle spray to vigorously massaging.
To do so, follow these steps:
Adjust to the desired water temperature and the desired water pressure
using your tap.
IAN 90051
Eisl Sanitär GmbH
Mattseer Landstraße 8
A-5101 Bergheim
© by ORFGEN Marketing
Stand der Informationen · Stand van de informatie · Last Information
Update: 03 / 2013 · Ident.-No.: DX8001ACP-LIDL032013-DE/NL
90051_Multifunktionsduschkopf-Set_DE_AT_CH_NL.indd 2 12.03.13 09:23