Assembly, Selecting a pitch, Erecting the tent – Rocktrail Hiking Tent Z31364 Benutzerhandbuch

Seite 4: Packing the tent together, Cleaning, Disposal

Advertising
background image

4 GB/IE

J

Ensure that the tent is not too taut when it is

erected, otherwise it may not be able to adapt

to changing weather conditions and might be

damaged.

J

Zips are wearing parts and do not fall under

the guarantee conditions.

J

The polyester material of the tent consists of

water-repellent material.

J

It is possible that during the first rainfall the tent

will not be completely watertight. However, the

threads of the tent will contract when exposed

to water so that after a short time the tent will

become watertight.

J

When exposed to moisture and rain, tent

fabrics expand to varying degrees and make it

necessary to adapt the length of the guy lines.

If the material becomes taut again while drying,

the guy lines have to be loosened again in

good time.

J

Do not use any insect spray in or on the tent.

J

Small leaks on the seams can be repaired with

a seam spray and impregnation spray can be

used for the tent skin.

Q

Assembly

Q

Selecting a pitch

The ground should be flat, clean and as smooth as

possible. Before you erect your tent, remove any

pointed and sharp objects (e.g. stones, branches etc.).

Please ensure that the tent

1

is positioned in such a

way that its entrance is protected against the wind.

j

When selecting a pitch for your tent

1

,

remember that you need not only an area for

the floor of the tent, but also room for the guy

lines. You should also ensure that there is

enough space to walk around the tent

1

and

that there are no tripping hazards.

Q

Erecting the tent

j

Erect the product in accordance with illustra-

tions A to C.

Q

Packing the tent together

j

Please ensure that the tent

1

is completely

dry before you pack it together. Otherwise this

may result in stains and damage to the fabric.

j

Always fold up the tent

1

so that its ground

sheet is facing outwards.

j

The tent pegs

6

and other individual parts must

be packed separately in the bags provided.

Otherwise the tent pegs

6

might damage the

tent

1

.

Q

Cleaning

j

For cleaning the tent and removing any stains

you should only use a cleaning agent that is

specifically intended for cleaning polyester tents.

j

Remove any dirt from the tent

1

with a soft

sponge and clean water.

j

Please allow all parts to dry thoroughly before

you repack the tent

1

. This will prevent the for-

mation of mould, bad odours and discolouration.

Q

Disposal

The packaging is made entirely of

recyclable materials, which you may

dispose at local recycling facilities.

Contact your local refuse disposal authority for more

details of how to dispose of your worn-out product.

79410 GB_IE_SE_DK.indd 4

10/29/2012 10:36:20 AM

Advertising