Rocktrail 12V Electric Cool Bag RKT 12 A1 Benutzerhandbuch

Seite 9

Advertising
background image

Rocktrail RKT 12 A1 Electric Cool Bag 12V

English - 7

Place the connection cable in the vehicle so that the driver is not impeded as there will be a

danger of accidents otherwise.

Secure the cool bag in the vehicle to prevent uncontrolled movements so that it cannot pose a

risk for the vehicle occupants in the event of an accident or during a hard braking manoeuvre.

Switching the cool bag on or off

You must make sure that your vehicle has a 12V car power supply. The cool bag must not be

used with a 24V car power supply.

Unwind the connection cable completely. Now insert the cigarette lighter plug [5] into a suitable

cigarette lighter socket of your vehicle. The cool bag is now switched on and begins to cool. To

switch off the cool bag, disconnect the cigarette lighter plug [5] from the cigarette lighter socket of

your vehicle.

Since the cigarette lighter socket of some vehicles supplies power even if the ignition is
switched off, you should disconnect the cigarette lighter plug [5] from the cigarette lighter

socket of your vehicle when leaving the vehicle. Otherwise, the battery of your car could run

down to such an extent that you cannot start the car engine.

Energy saving tips

Do not expose the cool bag to direct sunlight.

Only use previously cooled food and drink.

Do not open the cool bag for longer than necessary and close the bag cover completely with
the drawstring [2].

Ensure that you do not pack the cool bag too tightly and that air can circulate between the

goods to be cooled.

Advertising