Ultimate Speed UASB 12 A1 - Handbuch (Seite 8)

5 UASB 12 A1
GB
IE
■ Protect the seat cushion from moisture and liquid penetration. Never submerge
the product in water and do not place objects fi lled with liquids (such as fl ower
vases) on the product.
■ Do not insert needles or other sharp pointed objects into the seat cushion.
■ The product must not be used in the vicinity of heat sources, naked fl ames
(e.g. candles) or in direct sunlight in order to avoid overheating.
■ When the product is being used in vehicles, it must be ensured that safety equip-
ment is not adversely aff ected, particularly the side airbags. Please refer to the
operating instructions for your vehicle or ask your workshop if you have any
questions regarding airbags.
■ Please ensure that you do not fall asleep when using the seat cushion. Using the
product for too long can cause burns.
■ Do not use the seat cushion on areas of the body that are infl amed, injured or
swollen. If in doubt, obtain medical advice before using the product. Otherwise
the infl ammation, injury or swelling may be aggravated.
■ During operation, always ensure that the 12 V connector is fi rmly plugged into
the 12 V connection and the socket is free of soiling. If there is insuffi cient contact
between the connector and the socket, vehicle vibration may cause the power
supply to switch on and off at short intervals. This can result in overheating.
■ Please ensure that you:
- only connect the seat cushion to the voltage specifi ed in the technical information,
- do not switch the seat cushion on when it is folded or crumpled up,
- do not kink the seat cushion sharply,
- do not place any objects such as cases or washing baskets on the seat cushion
whilst it is switched on. Otherwise the seat cushion could become damaged.
IB_90976_UASB12A1_LB6.indb 5 IB_90976_UASB12A1_LB6.indb 5 31.05.13 14:53 31.05.13 14:53