Livarno Z31206A - Handbuch (Seite 13)

13 GB/IE
Insert the dowels in the drilled
holes.
Using the screws secure the wall
bracket to the wall (see Fig. B).
Install the light onto the wall
bracket (see Fig. A).
Mounting the
infrared remote
control
Note: you will need a drill for
installation.
CAUTION! RISK OF INJURY!
Refer to your drill’s operating
instructions.
Place the mounting bracket for
the infrared remote control 11 in
the desired location on the wall
and mark the drill holes. If neces-
sary, use a level (see Fig. D).
Drill the holes.
CAUTION! Be sure not to
damage lines inside the wall.
Insert the dowels in the drilled holes.