Livarno 52337 - Handbuch (Seite 6)

English
Mounting, switching on, malfunctions
Observe all of the instructions and warnings. Improper use or incorrect operation can lead to serious physical injury
(e.g. from electric shock or burning) and substantial material damage (e.g. from fire).
Storage and transport
Store and transport the lamp only in its original packaging. Protect packaged light from mechanical impact, moisture, frost and dust.
Comes with:
Lamp, Mounting material, Bulb(s) not included!
Unpacking
Take all the parts of the lamp out of the box and remove the packaging material. Put all the parts of the lamp on a soft surface in
front of you, such as a carpet. Check the parts for any possible visible damage.
Mounting and electrical installation
The mounting and electrical installation must be carried out by a qualified electrician.
Switch off (or remove) the mains fuse before mounting and installing the light (see illus. p.2,A).
Make sure the power is not connected by using an appropriate electricity indicator.
1. Connect the power cable to the designated terminal block inside the lamp: L / N and earth wire (see illus. p.2,B1).
2. (see illus. p.2,B3)
3. Place the lamp glass over the holder (see illus. p.2,B4).
4. Use the ring nut to fasten the glass to the holder (see illus. p.2,B5).
5. Turn the bulb clockwise into the holder until it stops (see illus. p.2,B6).
6. Switch the fuse back on (see illus. p.2,C).
Switching on
Switch the light on / off with the mains switch
Disposal of packaging
Dispose of the packaging material, sorting it according to type.
Keep packaging and wrapping away from children. Danger of suffocation!
Damage and malfunctions
In the case of malfunction or damage to the lamp, disconnect it permanently from the domestic electrical installation. Do not use it
anymore. Repairs should be carried out only by a qualified electrician or at the service centre. Never attempt to repair the lamp
yourself.
03/10; Lidl - Block 3; BK45564; 52337 5/28