Silvercrest SDLT 1500 A2 - Handbuch (Seite 10)

7 SDLT 1500 A2
GB
IE
CY
Operation
Adjusting the browning level
The desired browning level can be adjusted infi nitely from "light" (1) to "dark" (7)
using the toasting dial 6.
NOTE
► Note that, subject to the thickness of the bread in the toaster, the level of
browning can vary somewhat even if the toasting dial 6 has not been
adjusted! The fewer the number of slices inserted, the higher the browning
level. Thus, if you are not intending to toast many slices, always set the
toasting dial 6 a little lower.
Toasting
CAUTION – RISK OF FIRE!
► When the appliance is in operation, do NOT cover the toasting slots 9.
There will be a risk of fi re! The appliance could be irreparably damaged!
1) After setting the desired browning level, insert the bread into the toasting slots 9.
2) Press the toasting lever 2 downwards. The automatic bread centring device
centres the inserted bread in the toasting slots 9.
3) When the desired level of browning has been reached, the toaster automati-
cally switches itself off and the slices are ejected upwards.
Stopping the toasting process
If you wish to stop toasting, press the "Cancel" button 3 . The toaster switches
itself off and the bread slices are ejected upwards.
Reheat function
The reheat function enables you to warm bread without browning it. As an
example, for toast that has gone cold. The bread is only briefl y warmed.
1) Insert the bread and press the toasting lever 2 down.
2) Press the "Reheat" button 4. During the heating process, the indicator
lamp on the "Reheat" button 4 lights up.
3) Once the bread has warmed up again, the toaster switches itself off auto-
matically, the indicator lamp on the "Reheat" button 4 goes out and the
bread slices are ejected upwards.
IB_102859_SDLT1500A2_GB_IE_CY.indb 7 29.09.14 16:37