Silvercrest SIM 13 B2 - Handbuch (Seite 10)

- 7 -
2. Place the accessory (0, q, w, e, r, t) of
your choice on the massage head 1 and pay
attention that the round curbs of the massage
head 1 and the accessory (0, q, w, e, r,
t) lie one on top of the other.
3. Push the accessory (0, q, w, e, r, t) onto
º38
the massage head 1 then check to make sure that
it is firmly fixed.
Usage
• Insert the power plug into a wall power socket.
Switching on
• To switch on the Infrared lamp 9 slide the
switch Infrared 4 into the position "I".
• Slide the switch Massage 5 into the position "I"
for normal vibration.
• For a stronger vibration slide the switch Massa-
ge 5 into the position "II".
ATTENTION!
After an extended heating-up of the infrared lamp 9
without bodily contact, the temperature of the lamp
can be perceived as unpleasantly high! Always
check the temperature of the infrared lamp 9 with
the tip of a finger before making contact with the
body itself. A temperature that is too high can be re-
duced by switching the infrared lamp 9 off for a
short period.
Massage
• Hold the Infrared Massage Appliance by the
grip 7 and, dependant on the application,
place the infrared lamp 9 or the massage
head 1 against the skin.
• Guide the infrared lamp 9 or the massage
head 1 in circular or straight movements slowly
over the skin.
• Massage without applying undue pressure.
• To achieve an optimal effect, try to keep the skin
taut.
• Always start the massage at the position furthest
from the heart and then slowly work towards the
heart.
Ending usage
Switching off
• After use, dependant on the application, return
the switches Infrared 4 and Massage 5
back into the position "0".
• Remove the plug from the wall power socket.
WARNING!
After use do not lay the Infrared Massage Appliance
down with the infrared lamp 9 facing downwards!
It could still be hot and there is still a grave risk of
fire!
• When laying it down always ensure there is
sufficient safety distance between the massage
appliance and inflammable objects such as
curtains, tablecloths etc..
• Remove the accessories (0, q, w, e, r, t)
from the massage head 1 and lay the massage
appliance with the flat area of the massage
head 1 facing downwards.
ATTENTION!
For approx. 15 minutes after the last usage do not
leave the appliance without supervision.
IB_102535_SIM13B2_IE_CY.qxp 30.07.2014 14:03 Uhr Seite 7