Silvercrest KH 2299 - Handbuch (Seite 13)

- 11 -
Press the button TIMER •
s
once again. The time then con-
tinues to run.
To completely switch the kitchen timer off, press and hold •
the button TIMER s for 3 seconds The clock and cooking
pot symbol disappear.
Programming the kitchen timer
You can programme frequently used times for the kitchen
timer into the appliance, so that you do not need to enter
them in repeatedly. As the appliance can be used by several
people, it has user switching, A/B. Both users can save 4 dif-
ferent timer periods each.
1. First, select the desired user. To switch between users, press
and hold the button USER/BAND h for two seconds.
2. Then press the button TIMER s.
3. Using the buttons UP  /DOWN  1(/l enter in the
desired time.
4. Press the button MEM/AMS o. On the right and next to
the time indicator, "T" lights up.
5. Press one of the pre-set buttons M1–M4 t–i, under
which the kitchen timer period should be saved. Its
number is now shown to the right of the "T".
6. Press the button MEM/AMS o once again to conclude
the saving.
Setting alarm times (Alarms 1 and 2)
You can programme two alarm times into your kitchen radio.
Alarm function Symbol in the display r
Acoustic signal
Radio
Switched off no symbol
1. In automatic mode press the button AL1/VOL. + g (or
AL2/VOL. – f). In the display r the last set alarm time
and the symbol for the type of alarm blink for 10 seconds.
2. Press the buttons UP  /DOWN  1(/l to set the desired
alarm time.
3. Press the button AL1/VOL. + g (or AL2/VOL. – f) re-
peatedly until the desired alarm function (see the table
above) is indicated in the display r.
4. Repeatedly press the button TIMER s to set the weekdays
on which you require the alarm function: You can select