Operation, Before the first usage attention, Fill with ground coffee – Silvercrest SKAS 1000 B1 Benutzerhandbuch

Seite 6

Advertising
background image

- 4 -

• Remove all packaging materials from the

appliance.

• Place the appliance on a dry, flat and heat-resis-

tant surface.

• Place the glass jug on the heating plate in the

appliance.

• Open the filter holder 7.
• Place the filter insert 1 in such that the coffee

exit 8 projects through the opening.

• Close the filter holder 7.
• Finally, insert the plug into the power socket.

Operation

Before the first usage

Attention!

• Never fill the water tank with a total volume of

more than 12 cups of mains water.
NEVER fill the water tank with less than 3 cups
of water. Otherwise, the coffee machine could
be damaged. Use the markings on the water-fill
indicator 4.

• Unplug the coffee machine immediately after

use. The appliance is completely free of electri-
cal power ONLY when it is unplugged.

• Fill the water tank only with mains water.

Using anything else could damage the
appliance.

1. Open the glass jug and the water tank lid 3.
2. Carefully rinse the glass jug with mains water.

Fill the water tank with mains water. Pay heed to
pouring the water slowly into the water tank,
so that it can run through both tank openings.
Empty it again by carefully tipping the appliance
over a sink and allowing the mains water to pour
out.

3. Fill the glass jug with 12 cups of mains water.
4. Pour the water completely into the water tank.
5. Close the water tank.
6. Place the emptied glass jug on the heating

plate.

7. Switch the coffee machine on with the On/Off

switch 5 (I). The integrated control lamp
glows. Wait until the brewing process is
complete.

8. Empty the glass jug.
9. Switch the coffee machine off with the On/Off

switch 5 (O). The integrated control lamp goes
out.

10. Wait until the appliance has cooled down.

Subsequently, you can use the coffee machine for
the brewing of ground coffee.

Fill with ground coffee

1. Swing the filter holder 7 to the side. The filter

bag 1 must be put in.

2. Place a filter bag (size 1x4) with folded over

sides into the filter compartment 1.

3. Fill it with the measuring spoon 6.

IB_68663_SKAS1000B1_LB3 29.09.2011 10:05 Uhr Seite 4

Advertising