Silvercrest SDB 2400 A1 - Handbuch (Seite 17)

15 SDB 2400 A1
GB
IE
Troubleshooting
PROBLEM POSSIBLE CAUSE
POSSIBLE
SOLUTIONS
The appliance does not
function. The control lamp
"Power" does not glow.
The plug is not connected to
the mains power supply. Connect the appliance to
a mains power socket.
The appliance is damaged.
In this case, contact
Customer Services.
After ironing, there are
stains on the textiles
The soleplate 9 is soiled.
First carry out a self-
cleaning process and
then clean the iron.
You have poured chemical
additives into the water tank.
Empty the water tank,
carry out a self-cleaning
process and then fi ll it
with only water as per the
instruction in "Filling with
mains water".
You have sprayed laundry
starch onto the fabric.
In principle, spray laundry
starch onto the back of the
fabric. Clean the sole of
the iron 9.
The control lamp "Tempera-
ture" 4 lights up and then
goes out.
This is not a defect: the control
lamp "Temperature" 4 in-
dicates the heating up of the
appliance.
-
It will not produce steam.
The steam regulator 1 is
placed at the position
.
Adjust the steam regulator
1 to a higher position.
There is not enough water in
the water tank. Fill the water tank with
water..
The set temperature is too low
for steam generation.
Set the temperature regula-
tor 7 to at least level
or higher.
IB_66493_SDB2400A1_FI_SE_DK.indb Abs2:15 IB_66493_SDB2400A1_FI_SE_DK.indb Abs2:15 24.04.12 10:05 24.04.12 10:05