Silvercrest SOML 807 A1 - Handbuch (Seite 13)

Mouse with charging cradle SOML 807 A1
English - 11
 Open the battery compartment on the bottom of the wireless mouse.
 Remove the USB nano receiver (12).
 Insert the supplied rechargeable battery (size AA) into the wireless mouse
and make sure that the battery is properly aligned according to the
polarity (+ and -) (see figure).
 Close the battery compartment.
 Press the On/Off button (13) on the bottom of the wireless mouse to
power it on.
 Plug the USB cable of the charging cradle into a free USB port on your
powered-on computer. The charging indicator (10) blinks. Please wait a
moment until the charging indicator stops blinking.
 Place the wireless mouse onto the charging cradle.
 Next the charging indicator (10) will flash for several seconds and the
charging process will initialise. During charging the charge indicator (10)
will light orange. When the charging process is completed, the charging
indicator will light green.
If the indicator light (8) on the upper side of the wireless
mouse lights orange, the rechargeable battery is exhausted.
Then place the wireless mouse onto the charging cradle.
Should the wireless mouse fail to work, power it off and back
on. Sometimes removing and re-inserting the rechargeable
battery will also help.
After inserting a rechargeable battery into the mouse or
powering the mouse on, the indicator (8) will flash several
times during automatic synchronisation with the receiver.
When the synchronisation is completed, the status indicator
will stop lighting.