Silvercrest SPB 5.2 A1 - Handbuch (Seite 16)

SilverCrest SPB 5.2 A1
14 - English
into the USB socket (1) of the Power Bank (A). If charging does not start
automatically, briefly press the Charge level/START button (3) to start the
charging process. Alternatively, you can also use the original charging cable of
the respective device manufacturer (USB port).
During the charging process, the LED display (2) gives you information about
the current charge level of the Power Bank (A). Briefly press the Charge
level/START button (3) to display the charge level (it is displayed for
approximately three seconds).
LED display Charge level
All LEDs on Approximately 100%
Three LEDs on Approximately 75%
Two LEDs on Approximately 50%
One LED on Approximately 25%
All LEDs off Approximately 0%
Please note that the LED display gives only an approximate value of the actual
charge level of the Power Bank.
You can stop the charging process at any time by unplugging the USB
charging cable (B) or by pressing the Charge level/START (3) button for a
longer time period (approximately three seconds). To restart the charging
process, briefly press the Charge level/START button (3).