Silvercrest SHLF 2000 B1 - Handbuch (Seite 13)

10 SHLF 2000 B1
GB
IE
CY
Set-up location requirements
DANGER
Fire risk through contact with materials!
There is a risk of fi re if the heating elements come into contact
with fl ammable materials!
► Do not place the appliance in the vicinity of curtains and other fl ammable
materials.
► Do not allow fl ammable materials (e.g. textiles) to come into contact with
the appliance.
► Do not cover the appliance.
For safe and trouble-free operation of the appliance, the set-up location must fulfi l
the following requirements:
■ The appliance must be placed on a fi rm, fl at and horizontal surface.
■ Minimum spacings to the housing of 50 cm to the sides, 50 cm above, 50 cm to
the rear and 100 cm to the front must be maintained.
■ Do not place the appliance in a hot, wet or extremely moist environment or in the
vicinity of fl ammable materials.
■ The mains power socket must be easily accessible so that the power cable can
be easily disconnected in an emergency.
■ Environmental temperature range: 0 to +40°C
■ Humidity (no condensation): 5–75%
Before initial use
■ Remove all packaging materials and all transport locks from the appliance.
NOTE
► Light odour formation can occur during initial use. This is normal and is
completely harmless.
IB_100043_SHLF2000B1_LB6.indb 10 IB_100043_SHLF2000B1_LB6.indb 10 17.06.14 15:25 17.06.14 15:25