Powerfix Radiator Bleeders Benutzerhandbuch
Seite 2
GB
GB
GB
GB
GB
- If the fault can not be rectified over the phone, we
would ask you to send the appliance in its original
packaging to the following address:
GSL mbH
Am Weimarer Berg 6
99510 Apolda
Germany
IAN 90254
Warranty repairs can only be carried out if the receipt
is enclosed.
Many thanks for you understanding.
With best wishes
Your Olympia Business Systems Vertriebs
GmbH
Manufacturer
Olympia Business Systems Vertriebs Gmbh
Zum Kraftwerk 1
45527 Hattingen
Germany
Cleaning
Clean the fully automatic radiator bleed vent from
the outside, using a slightly moist cloth.
Disposal
The packaging is made from environmentally
friendly materials, which may be disposed
through your local recycling facilities.
Contact your local authorities for information on how
to dispose of the product at the end of product life.
Warranty
ATTENTION! PLEASE KEEP IMPORTANT WARRANTY
DOCUMENTATION!
Dear Customer,
We are delighted that you have decided on a quality
product. Should an unexpected technical problem
arise with your appliance, please note the following
points:
- The warranty period for your appliance is
36 months.
- Please keep the receipt and the original packaging.
– Should a problem arise, please call our hotline first:
00800 100 22 100 (international)
Our expert staff is often able to help over the phone.
[email protected]
Now open the radiator again. The bleeding oc-
curs automatically.
Note: After the vent has been fitted, the pressure
in the heating system must be checked and, if nec-
essary, brought back to the target pressure again.
Quick bleed
For quick bleeding, for instance when first fitting,
the valve head can be screwed out 1 - 2 turns by
hand using the knurled screw (works like manual
bleeding).
As soon as water escapes, the valve must be
turned back in tightly by hand.
Attention: Water leak, please catch with a suit-
able container!
Non-return valve
When the valve head is screwed out completely, a
built-in non-return valve prevents water leakage. Only
necessary in the case of maintenance work.
Note: If necessary call a specialist (plumber or heat-
ing contractor). We assume no liability for valves that
are not fitted properly.
Maintenance
The fully automatic radiator bleed vent is maintenance-
free. It is however recommended, that manual bleeding
once a year is carried out to fully check the functioning.
Technical Data
Operating temperature: max. 100 °C
Operating pressure
at the radiator:
min. 0.1 bar, max. 8.5 bar
Operating medium:
water without additives
Use
Remove old valve
Before swapping the valves, the radiator must be
depressurised.
Remove the valve using the open ended spanner
provided. Remaining pressure in the radiator escapes.
Catch escaping water using a suitable container.
CAUTION! RISK OF SCALDING! The radiator
must be cooled down.
Fitting new valve
Note: The fully automatic radiator bleed vent is self-
sealing, it is not necessary to use hemp or Teflon tape
to seal it.
Fit the valves vertically at the highest point of the
radiator, with the valve head facing upwards or
horizontally, and do NOT fit them with the valve
head facing downwards.
Caution: Water leaks possible!
Fitting and bleeding
The fully automatic radiator bleed vent is screwed
into the radiator, using the open-ended spanner
provided. The automatic bleeding is now activated.
Radiator Bleeders
Introduction
We congratulate you on the purchase of
your new device. You have chosen a high
quality product. The instructions for use are
part of the product. They contain important informa-
tion concerning safety, use and disposal. Before using
the product, please familiarise yourself with the entire
safety information and instructions for use. Only use
the product as instructed and only for the stated areas
of use. If you pass the product on to anyone else, please
ensure that you also pass on all the documentation
with it.
Intended use
This fully automated radiator bleeder is intended for
the automatic and continuous bleeding of water bearing
systems such as radiators, pipes, floor heating mani-
folds etc. Any other use or modification of the product
shall be considered as improper use and could give
rise to considerable dangers. We will not accept liability
for loss or damage arising from improper use. The
device is intended for private, domestic use only.
Scope of delivery
2 valves 1/2”
1 open ended spanner (19/22)
OLYMPIA BUSINESS SYSTEMS VERTRIEBS GMBH
Zum Kraftwerk 1
45527 Hattingen
Stand der Informationen · Last Information Update: 03 / 2013
Ident.-No.: 90254032013-AT