Hamilton Beach Drink Master - Handbuch (Seite 3)

5 4
Helpful Hints
• Most drinks can be mixed in less than two minutes.
• Whole fruit should not be used when making fruit drinks.
Mash or puree fruit; add to drink, and mix.
• The container must always be filled to at least the minimum
level mark or the liquid will not reach mixing shaft. When
mixing thin mixtures, such as powdered diet drinks, do
not fill above maximum level mark (12 ounces/355 ml) or
liquid may overflow while mixing.
• For best results, all liquid ingredients should be as cold as
possible. Milk drinks will taste best if milk is ice cold. The
colder the milk, the thicker and more frothy the drink.
• All syrups and powdered mixes should be added just
before mixing to prevent them from sinking to the bottom
of the container.
• The DrinkMaster does not crush ice. For best results, use
crushed ice if the recipe calls for ice.
Cleaning Your DrinkMaster ®
1. Unplug unit. To remove mixing shaft, grasp and pull down
to release from head. Wash the mixing shaft in warm,
soapy water.
2. The metal mixing container should be washed in warm,
soapy water or in a dishwasher.
3. To clean DrinkMaster, wipe with damp cloth or sponge.
Do not use abrasive cleansers of any type.
DO NOT IMMERSE THE APPLIANCE IN WATER OR
OTHER LIQUID.
Using Your DrinkMaster
®
BEFORE FIRST USE: Wash container and mixing shaft
before using.
1. Place mixing shaft in unit by tilting
the head back and inserting the
mixing shaft until it “snaps” into
place.
2. Set Control Switch to O (OFF).
Plug into electrical socket.
3. Place ingredients to be mixed in
container.
4. Place container onto DrinkMaster,
making certain that container’s
top edge is behind container
support and container bottom is
on container rest.
NOTE: Drink mixer will not operate unless container top
edge is behind container support.
5. With mixing shaft “snapped” in place, move Control
Switch to desired speed to process. Start with Speed 1
(LOW) then increase to Speed 2 (HIGH) if desired.
6. For hard ice cream or very thick shakes: with mixing shaft
still submerged in mixture, move the container around on
the support for more thorough mixing then return container
to rest and support.
7. When finished, turn unit to O (OFF) and tilt head up.
8. Pour contents from container and serve.
840124600 Ev02.qxd 4/23/04 10:47 AM Page 4