Hughes & Kettner RED BOX MSD-185007/07 - Handbuch (Seite 10)

10
The Hughes & Kettner Red Box Classic converts
Line Out and Speaker Out signals into balan-
ced, frequency-compensated signals, enabling a
direct feed to a mixer. The Red Box Classic fea-
tures two voicing options, a 4 x12" cabinet and a
2 x12" combo.
Benefits
• No mic required • No sound deviations due to
different mics/mic positions
• Authentic speaker
sound even at low levels • No feedback • No un-
desirable spillage from other signal sources • No
phase cancellations caused by neighboring mics
Setting up and operating the Red Box
• Switch your amp‘s power off.
• If the mixer desk does not feature phantom
power, insert a 9 V E-block battery or connect
a suitable AC adaptor (refer to “Technical
Specifications”)
• Connect all cables as illustrated in the diagram.
The Red Box activates as soon as you plug a
cable into the Line In or Speaker In jacks
• Switch your amp‘s power back on. Select one
of the voicing options, 4 x12" or Combo
• To switch the Red Box off, simply unplug the
cable to the Line In or Speaker In jack. This cuts
its power supply.
RedBox_BDA1_1_6,5pt.indd 10 10.08.2007 14:42:53