Quickspecs – HP ProLiant DL140 Benutzerhandbuch
Seite 7
diskontcomputer.com
Firma Matzner Michael
Wiener Bundesstraße 38
4061 Pasching, Austria
:: Seite 7 von 29 :: Datenblatt zum Produkt HP ProLiant DL140 (G3) / 1.60G DC mit DC# 128191 ::
Fragen zu dem Produkt HP ProLiant DL140 (G3) / 1.60G DC? Kein Problem - wir helfen Ihnen per eMail ([email protected]) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf
Power Supply
650 Watts, auto-switching, PFC (Power Factor Correcting)
System Fans
6 system fans ship standard; Non-hot plug, Non-redundant
OS Support
Microsoft Windows® 2000 Server (32-bit)
Microsoft Windows 2000 Advanced Server (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 Standard Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 Enterprise Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 Web Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 for Extended Systems Standard Edition
(64-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 for Extended Systems Enterprise
Edition (64-bit)
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
NOTE: For an up-to-date listing of the latest OS support matrix, please see:
http://www.hp.com/go/supportos
NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant DL140 G3,
please see:
http://h18023.www1.hp.com/support/files/server/us/index.html
NOTE: For more complete and up-to-date information on how to buy server operating systems
from HP please visit the OS product site at:
http://h18004.www1.hp.com/products/servers/software/OEM.html
NOTE: Drivers may also found on the base media for some Linux OS's. When configuring your
server, please consult your base media driver base, or visit HP.com at:
http://h18023.www1.hp.com/support/files/server/us/index.html
NOTE: For more Linux OS support & certification information, please visit our the ProLiant &
Bladesystem Server Linux matrix
http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert.html
Rack Airflow
Requirements
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for
maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow
5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate
airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must
be a minimum of 7 cm (2.75 inches)
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack.
This arrangement ensures proper airflow. Using a rack without blanking panels results in improper
cooling that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation
CD provided with the server, or to the server documentation located in the Support section at the
following URL:
http://h18000.www1.hp.com/products/servers/proliantdl140/index.html
QuickSpecs
HP ProLiant DL140 Generation 3 (G3)
Standard Features
DA - 12509 Worldwide — Version 14 — July 9, 2007
Page 7