Marantz PM6002 - Handbuch (Seite 7)

3
ENGLISH
BEFORE USE
7 For use of Remote controller
• Loading batteries
Before using the remote controller for the first time,
load the batteries in the remote controller. The
batteries provided are used to verify the operations
of the remote controller only.
1. Remove the battery cover.
2. Insert the batteries with correct +/– orientation.
3. Close the battery cover until it clicks shut.
7 Cautions on handling batteries
Misuse of the batteries can result in electrolyte
leakage, rupturing, corrosion, etc.
Bear in mind the following points when using
batteries.
• Remove the batteries from the remote control
unit if the unit is not going to be used for a
prolonged period (a month or more).
• Do not use an old battery together with a new
one.
• Insert the batteries while ensuring that their
ª and · poles are properly aligned with the
corresponding markings on the remote control
unit.
• Batteries with the same shape may have different
voltages. Do not use different types of batteries
together.
• If electrolyte has leaked, thoroughly wipe the
inside of the battery compartment, and then
insert new batteries.
• When batteries which are no longer required
are to be discarded, follow the directions
(regulations) laid down by the local authorities in
the area concerned for their disposal.
7 Operatable range of Remote
controller
Operate the unit with the remote controller within
the range of the illustration below.
Approx. 5m
Remote controller
Caution
• Do not allow direct sunlight, an inver ter
fluorescent light or other strong source of light to
shine onto the player’s infrared receptor window.
Otherwise, the operation of the remote controller
may be disabled.
• Bear in mind that operating the remote controller
may cause other devices operated by infrared
rays to be operated by mistake.
• The remote controller cannot be operated if the
space between the controller and the player’s
infrared receptor window is obstructed.
• Do not place any objects on top of the remote
controller.
Doing so may cause one or more buttons to be
held down which will cause the batteries to run
down.