Metrologic Instruments MS5100 - Handbuch (Seite 11)

7
USB SCANNER I NSTALLATION
1. Connect the 10-pin RJ45 plug of the PowerLink cable into the jack on the
MS5145 USB scanner.
Note: The MS5145 USB scanner will receive power directly from the host
system; no external power supply is required.
2. Connect the USB connector of the PowerLink cable into the USB port of the
host system.
3. When the MS5145 is ready to scan, the green LED will turn on, the red LED
will flash and the scanner will beep once.
n o