Ide Line 751-079 Benutzerhandbuch

Seite 7

Advertising
background image

USE

The convection fan works automatically on every setting. When
the desired temperature and heating element is chosen, set the
timer at the desired position. The convection fan will start
operating. When the set temperature is reached the thermostat
will cut off. The thermostat will turn on and off during operation
to maintain the set temperature.
-

Turn the selector dial to the desired position.

-

Turn the thermostat dial clockwise for the desired
temperature.

-

Turn the timer dial clockwise to the desired cooking time.

-

The control light will light up until the desired temperature is
reached.

-

When the cooking procedure is done , turn the timer back to
0 position to turn off the oven.

GRILL COOKING

-

Leave the door at the open point.

-

Turn the selector dial to the upper heating element.

-

Turn the temperature dial to 250°C

-

Turn the timer to the desired grill time.

-

When the grill cooking is done, turn the timer back to
position 0 to turn off the oven.

AFTER USE

-

let the oven cool off.

-

Set the selector dial on OFF position.

-

Unplug the appliance from the outlet.

MAINTENANCE AND CLEANING

-

Unplug the appliance and allow it to cool, before cleaning
starts.

-

Do not immerse the appliance in water. All surfaces can be
cleaned with a clean damp cloth.

-

If stains still appear, it is recommended to use soap.

-

Do not use abrasive cleaners or sharp utensils to clean the
oven.

-

Clean inside with a clean damp cloth.

-

Always make sure that the oven is wiped off and the door is
open until the oven is completely dry.

ENVIRONMENTAL TIP

An electronic appliance should, when it is no longer capable of
functioning be disposed with least possible environmental
damage. The appliance should be disposed according to the
local regulations in your municipality, in most cases you can
discharge the appliance at your local recycling center.

THE WARRENTY DOES NOT COVER

-

If the above points have not been observed.

-

If the appliance has not been properly maintained, if force
has been used against it or if it has been damaged in any
other way.

-

Errors or faults owing to defects in the distribution system.

-

If the appliance has been repaired or modified or changed in

any way or by any person not properly authorized.

IMPORTER

Adexi group

We take reservation for printing errors.

Due to constant development of our products in regards to
function and design, we take reservation for changes without
notice.

7

751059_IM6 18/05/05 10:15 Side 7

Advertising