Transportschutz entfernen, What to do if, Entsorgung von altgeräten – AEG ELECTROLUX S 74270 KA Benutzerhandbuch

Seite 6: Entsorgungshinweise, Correcting malfunctions

Advertising
background image

6

Transportschutz entfernen

Das Gerät sowie Teile der Innenausstattung sind für den Transport
geschützt.

• Alle Klebebänder sowie Polsterteile aus dem Geräteinnenraum entfernen.

Die Kartonteile werden aus Altpapier hergestellt und sollten auch wieder zur
Altpapiersammlung gegeben werden.

Entsorgung von Altgeräten

Aus Umweltschutzgründen müssen Kältegeräte fachgerecht entsorgt wer-
den. Dies gilt für Ihr bisheriges Gerät und - nachdem es eines Tages ausge-
dient hat - auch für Ihr neues Gerät.
Warnung! Ausgediente Altgeräte bitte vor der Entsorgung unbrauchbar
machen. Netzstecker ziehen, Netzkabel durchtrennen, eventuell vorhande-
ne Schnapp- oder Riegelschlösser entfernen oder zerstören. Dadurch
verhindern Sie, daß sich spielende Kinder im Gerät einsperren (Erstickung-
sgefahr!) oder in andere lebensgefährliche Situationen geraten.

Entsorgungshinweise:

• Das Gerät darf nicht mit dem Haus- oder Sperrmüll entsorgt werden.
• Der Kältemittelkreislauf, insbesondere der Wärmetauscher an der Gerä-

terückseite, darf nicht beschädigt werden.

• Das Symbol

auf dem Produkt oder seiner Verpackung weist

darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall zu
behandeln ist, sondern an einem Sammelpunkt für das Recycling
von elektrischen und elektronischen Geräten abgegeben werden
muss. Durch Ihren Beitrag zum korrekten Entsorgen dieses Produkts
schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen.
Umwelt und Gesundheit werden durch falsches Entsorgen gefähr-
det. Weitere Informationen über das Recycling dieses Produkts
erhalten Sie von Ihrem Rathaus, Ihrer Müllabfuhr oder dem
Geschäft, in dem Sie das Produkt gekauft haben.

35

• Only leave door open as long as necessary.

• Do not set temperature any colder than necessary.

• Put frozen food in the fridge to defrost. The cold in the frozen food will

then be used to cool the fridge.

• Keep the heat emitting condenser, the metall grille on the rear wall of

your appliance, always clean.

What to do if ...

Correcting Malfunctions

A malfunction may be caused by only a minor fault that you can rectify
yourself using the following instructions. Do not perform any other work on
the appliance if the following information does not provide assistance in
your specific case.
Warning! Repairs to refrigerators/freezers may only be performed by
qualified service engineers. Improper repairs can give rise to significant
hazards for the user. If your appliance needs repairing, please contact your
specialist dealer or our Customer Service.

The food is too warm.

The appliance is near a heat
source.

Temperature is not properly
adjusted.

Please look in the "Initial Start
Up" section.

Turn the temperature regula-
tor to a colder setting tempo-
rarily.

Door was open for an exten-
ded period.

Please look in the "Installation
location" section.

A large quantity of warm
food was placed in the
appliance within the last 24
hours.

Open the door only as long as
necessary.

Malfunction

Possible Cause

Remedy

Appliance does not work.

Appliance is not switched on

Switch on the appliance.

Mains plug is not plugged in
or is loose.

Insert mains plug.

Fuse has blown or is defective.

Check fuse, replace if neces-
sary.

Socket is defective.

Mains malfunctions are to be
corrected by an electrician.

Appliance cools too much.

Temperature is set too cold.

Turn the temperature regula-
tor to a warmer setting tem-
porarily.

Advertising