Topcom Butler E350 - Handbuch (Seite 13)

Topcom Butler ME350/Twin/Triple/Quattro 13
Topcom Butler E350/Twin/Triple/Quattro
ENGLISH
8.2 Removing a handset
You can remove a handset from a base to allow another handset to be registered:
Press menu button
ÆUse the button to scroll to ‘System’ and press
ÆSelect ‘Delete HS’. Press OK and select the handset you which to remove (1-4) ÆPress
OK to confirm
ÆEnter the PIN code (default=’0000’) and press
.
9 Call transfer and intercom between two handsets
9.1 Call transfer and conference call during an external call
During an external call, press the INT key followed by the number (1-4) of the other handset.
Æ The other handset will start to ring:
– When the other handset takes the line you can talk internally.
If you hang up, the external line will be connected with the other handset.
If you press and hold the INT key for 3 seconds you can talk with the 2nd handset
and external line at the same time (conference call)
– Or press the INT key again to return to the external call.
Æ Press ON-hook button
to end the call.
9.2 Internal call (intercom)
• In standby press the INT key followed by the number (1-4) of the other handset.
• The other handset will start to ring. You can stop the ringing by pressing the ON-hook
button .
• If the other handset answers the call by pressing the OFF-hook button you can talk
internally.
• Press the ON-hook button to end the call.
You can only remove existing handsets and others then the one you are
using.
These functions only work when more then one handset (like a Twin/Triple/
Quattro version) is registered to the base!