Windsor CARPET EXTRACTOR CDT7IB/10080060 - Handbuch (Seite 20)

MAINTENANCE
CADET 86038340 04/19/07 4-3ENG
!
WARNING:
BELT REPLACEMENT
1. Turn off all switches and unplug machine.
2. Remove recovery tank and brush.
3. Remove the (2) screws that fasten the
solution tank to the frame, and tilt tank back
to expose the inside of the frame.
4. Loosen the (4) screws that hold the brush
motor in place and slide motor forward to
release tension in belt.
5. Remove the (2) screws that fasten the
vacuum shoe links (p/n 86227350 – PRV
NO. 05016) to the brush housing.
6. Remove the (3) screws that fasten the side
plate (p/n 86249420 – PRV NO. 62759) to
the brush housing to remove belt. NOTE: All
components associated with driving the
brush will come out with the side plate.
7. Reverse process to install belt.
ONLY QUALIFIED MAINTENANCE PERSONNEL ARE TO PERFORM
THE FOLLOWING REPAIRS.
SOLUTION PUMP REPLACEMENT
1. Turn off all switches and unplug the
machine.
2. Remove recovery tank.
3. Remove the (2) screws that fasten the
solution tank to the frame, and tilt tank back
to expose the inside of the frame.
4. Remove solution hoses from fittings in
pump.
5. Remove the (2) screws that fasten the
pump to the frame.
6. Reverse process to install pump.
62759
05016
Pressure Switch
86161980
PRV NO. 42-809332
Valve Asm
86258830
PRV NO. 84161
Diaphram
86235100
PRV NO. 29206
Pump Replacement Parts for Shurflo 100 psi (86026400-PRV NO. 65254)
Pump Head
86251040
PRV NO. 65187
Hsng/Pump Repair Kit
86136040 – PRV NO. 47350
Pump Hsng
86288790
PRV NO. 41387
Pump Repair Kit
86004600 – PRV NO. 47176
Pump Replacement Parts for Flojet 73 psi (86006110-PRV NO. 65189)
86227350
PRV NO. 05016
86249420
PRV NO. 62759