Xoro HSD 8405 - Handbuch (Seite 88)

38 HSD 8405
Engl
ish
SETUP
Video Setup Page
The Video Setup Page includes the settings
for „Component“, „Resolution“, „Quality“, and
„HDMI Setup“.
Video Out
The setting component specify the kind of
video output.
RGB
This setting is useful, when you connect the
DVD player with your TV set and the TV set
has a SCART connector which supports RGB signals. With RGB signals on SCART you can
get a better picture quality compare to FBAS signals (YUV setting).
YUV
If you connect the DVD player with a 3-wire component cable and connect them by YPbPr to
your TV set, than please use also the YUV setting.
CVBS
If you connect the DVD player by CVBS with a video cable to your TV set, than please the
setting CVBS.
Resolution
With this option you can choose the resolution when you have
connected the player with a HDMI or an 3-component wire to
the TV set. The player provided an up-scaling function, so that
the video output are extrapolate to maximum of 1080. On one
side you can select the resolution for PAL or NTSC content and
TV set’s. In case of an 3-componend-wire connection you can
also choose the progressive video output by using every resolu-
tion with the sign “p”, for example 576p, 720p or 1080p.
Settings for PAL:
576i, 576p, 720p50, 1080i50 and 1080p50
Setting for NTSC:
480i, 480p, 720p60, 1080i60 and 1080p60
The option “MULTI” try to adjust the setting automatically with the TV set.
Notes:
Please uses only this kind of resolution which is provided by the TV set.