At the end of the programme, Door seal, Door light – Zanussi ZWH 7140 AP EN Benutzerhandbuch

Seite 18

Advertising
background image

10

Door light

Deur

e

t

r

o

P

e

z

u

a

P

/

t

r

a

t

S

e

s

u

a

P

/

t

r

a

p

é

D

The pilot light 110 illuminates when the programme starts and indicates if the
door can be opened:

• light on: the door cannot be opened. The appliance is working or has

stopped with water left in the tub.

• light off: the door can be opened. The programme is finished or the water

has been emptied out.

• light blinking: the door is opening in a few minutes.

At the end of the programme

The appliance stops automatically. The pilot light of the
button 99 and the pilot light 110 go off. The display shows

.

If a programme or an option that ends with water left in the
tub has been selected, the pilot light 110 remains on and
the door is locked to indicate that the water must be emp-
tied out before opening the door.
Follow the below instructions to empty out the water:

• Turn the programme selector dial to

.

• Select the draining or spinning programme.

• Reduce the spin speed if needed, by pressing the rele-

vant button.

• Press the button 99.
At the end of the programme, the door can be now
opened. Turn the programme selector dial to

to switch

the appliance off.
Remove the laundry from the drum and carefully check
that the drum is empty. If you do not intend to carry out
another wash, close the water tap. Leave the door open to
prevent the formation of mildew and unpleasant smells.

Warning! If there are children or pets in the house,
activate the child safety device in the inner side of

the door frame (for more details read " Child safety" in the
chapter "Safety Information").

Stand by : during programme setting up and once the pro-
gramme has finished, if the programme selector dial and
any button are not touched, after a few minutes the energy
saving system is enabled. The pilot lights and the display
go off. The green pilot light of the button 99 flashes with a
low frequency. By pressing any button the appliance will
come out of the energy saving status.

Door seal

At the end of every cycle,
check from the door seal
and remove objects that
could be trapped in the
fold.

118

Advertising
Dieses Handbuch ist für die folgenden Produkte bezogen werden: