Zanussi ZWH 7140 AP EN - Handbuch (Seite 7)

• Remove the power supply cable and the draining and
inlet hose from the hose holders (C C) on the rear of
the appliance.
• Unscrew the three bolts (A A) and remove the hose
holders (C C).
• Slide out the relevant plastic spacers (B B).
W Warning! D Do not re-
move the drain hose
from the rear support. Re-
move this hose only if it is
necessary to drain the wa-
ter. Refer to "Frost precau-
tion" and "What to do if".
• Plug the smaller upper hole and the two large ones
with the corresponding plastic plug caps.
P Positioning and levelling
x 4
77