SM Pro Audio P-Control: adjustable Phase Controller - Handbuch (Seite 4)

sound is a simple matter with a P-Control in your mix. You no longer need to bang your
head against your desk to get the tone you are looking for, just put a P-Control on the
channel insert or inline with your instrument. Kick Drums, Guitars, Stereo Micing will all
benefit greatly from the features which the P-Control offers.
With the added Transformer Isolation on the output you can also eliminate
many ground loop errors and noisy inputs found on some systems.
3. THE DESIGN CONCEPT
3.1 High quality components and design
The philosophy behind SM Pro Audio products guarantees a no-compromise circuit de-
sign and employs the best choice of components.
3.2 Inputs and outputs
All inputs and outputs are secured firmly to the exterior chassis housing. This ensures ro-
bust quality and confidence in performance under all conditions.
4. P-Control FRONT panel
The panel has 4 switches a Phase control, a Volume control and a Level Meter.
4.1 Bypass ON-OFF switch
Use this switch to totally bypass the device, so you can A-B the difference the P-Control
makes to the sound.
4.2 Low Cut ON-OFF switch
Use this switch to add an 80hz filter to the audio signal.
4.3 Phase Reverse ON-OFF switch
Use this switch to totally reverse the phase of the signal (180 degrees)
4.4 Phase Control Knob
Use this knob to manually control the degree in which you are moving the phase of the
sound from 0-180 degrees.
4.5 Output Volume Knob
Use this knob to manually control the output volume of the device.
4.6 Output Level Meter
View this meter to see what is your output level.
4.7 Ground/Earth Lift ON-OFF switch
Use this switch to select of the Earth/Ground should be removed from the signal to as-
sist in some situations where Earth/Ground hum can occur.
4.1 Bypass ON-OFF switch 4.2 Low Cut ON-OFF switch 4.3 Phase Reverse ON-OFF switch
4.4 Phase Control Knob 4.5 Output Volume Knob 4.6 Output Level Meter 4.7 Ground Lift switch