ABUS TVAC22010 Benutzerhandbuch
Seite 16
16
5. Maintenance and cleaning
5.1 Maintenance
Regularly check the product's physical state, e.g. check for damage of the housing.
If you suspect that safe operation cannot be guaranteed anymore, disconnect the product and ensure that it
cannot be used by mistake.
You can assume that safe operation is not possible anymore when
the device shows visible damage,
the device does not function anymore
Please note:
The product is maintenance free for you. Inside the product are no parts that can be checked or
repaired, so do not ever open it.
5.2 Cleaning
Wipe the product with a clean, dry cloth. If the device is very dirty, you can moisten the cloth with lukewarm
water.
Ensure that no liquids can get into the device.
Do not use any chemical cleaners, since they could damage the housing surface or the screen
(discolorations).
6. Disposal
Devices with this marking should not be put in the household garbage. Dispose of the
product at the end of its lifetime according to the applicable regulations.
7. Technical data
Item number
TVAC22010
Input
1 x BNC (HD-SDI)
Output
1 x BNC (HD-SDI)
Supported resolutions
720p50, 720p60, 1080i50, 1080i60, 1080p24, 1080p25, 1080p30,
1080p50, 1080p60, 2K (2048 x 1080)
Supported formats
SD-SDI (SMPTE 259M)
HD-SDI (SMPTE 292M)
3G-SDI (SMPTE 494M/495M)
Video system
HD-SDI
Impedance 75
Ω
Voltage supply
6 - 15 V DC
Current consumption
500 mA
Operating temperature
0 ~ +50 °C
Dimension (WxLxH)
63,6 x 70 x 26 mm