Lexibook RCD100DP - Handbuch (Seite 10)

Important Safety information
Mains supply
This equipment is designed to operate from a 230 Volt, 50Hz AC mains supply. Other power sources may damage it.
Check that the rating label on the back cover of the equipment says 230V AC ( ~ ) before you plug it in for the first
time.
Mains plug
We have fitted this equipment with a standard mains plug.
If the mains lead gets damaged it must be replaced by a qualified service agent with an approved lead of the same
type.
If you cut off the mains plug, for example to fit a different type, please destroy the old plug as it would be
dangerous if inserted into a live power outlet. Carefully follow the wiring instructions supplied with the new plug.
If a fuse is fitted to the plug, remove the fuse before throwing the plug away.
Carefully follow the wiring instructions supplied with a new mains plug.
Never use a fused mains plug without the fuse cover.
Mains plug wiring for the UK
In a re-wirable plug the wires in the mains lead of this equipment must be connected as follows.
The wire-coloured brown must be connected to the terminal that is marked with the letter L.
The wire-coloured blue must be connected to the terminal that is marked with the letter N.
Do not connect anything to the earth terminal which is
marked E, or
You must make sure the mains lead is firmly secured under the cord clamp.
Mains fuse
UK standard (BS1363) plugs must have a 3 amp (BS1362 type) fuse fitted. Replace the plug or have the power lead
assembly replaced if the fuse cover is lost.
If the power transformer or it’s leads become damaged, it must be replaced by a qualified service agent with the same
type and rating.
Symbols
Safe use and care of your audio equipment
We have designed and made this product to meet European safety standards, but as with any electrical equipment you
must take care to get the longest working life from it and stay safe. Here are a few tips to help you do this.
Read these instructions carefully before you try to use the equipment.
Protect the mains lead. You must ensure the mains lead cannot be walked on, crushed, chafed, cut, and so on.
This equipment is double insulated and an
earth connection is not required. Dangerous voltage constituting a risk of
electric shock is present inside this equipment.
There are important operating and
maintenance instructions in the literature
accompanying this equipment. This mark is applied to show the equipment
conforms to European safety and electro-
magnetic compatibility standards.
GB-2