Kaiser EH40.600 - Handbuch (Seite 18)

GB
18
ELECTRICAL CONNECTIONS
Before connecting the oven to the mains power supply,
make sure that:
- The supply voltage corresponds to the specifications on
the data plate on the front of the oven.
- The mains supply has an efficient earth (ground) con-
nection complying with all applicable laws and re-
gulations. Correct earthing (grounding) is a legal requi-
rement. If the appliance is not pre-fitted with a power
cable and/or plug, use only suitable cables and plugs
capable of handling the power specified on the
appliance’s data plate and capable of resisting heat. The
power cable should never reach a temperature 50° C
above ambient temperature at any point along its length.
If the appliance is to be connected directly to mains
terminals, fit a switch with minimum aperture of 3 mm
between the contacts. make sure that the switch is of
sufficient capacity for the power specified on the ap-
pliance’s data plate, and compliant with applicable
regulations. The switch must not break the yellow-green
earth wire. The socket or switch must be easily reachable
with the oven fully installed.
N.B. The manufacturer declines all responsibility for
damage or injury if the above instructions and normal
safety precautions are not respected.