WolfVision VZ-9plus 3 Anti-theft Device Guide - Handbuch

ENGLISH
Printed in Austria, August 2009 Design and specifications are subject to change!
Anti-theft Device 2: table lock bolt
Anti-theft Device 1: T-bar lock
Additional Information regarding Antitheft Device
The Visiualizer can be fixed with a , so that it can not
be stolen. Follow the instructions from the cable lock manual.
® security cable T-bar lock (Kensington Lock)
The Visualizer can also be fixed onto a table with
the supplied table lock bolt in order to minimize the
risk of theft.
Please note that the usable depth of thread is
8mm, do not screw in more than this.
Supplied accessories for anti-theft device
(part number):
1x Socket head cap wrench 5mm (101684)
1x Socket head cap wrench 2,5mm (101685)
1x Screw M8x35 (101686)
1x Screw M8x50 (101687)
2x Washer 8.4/16x1.6 (100527)
1x Assembly instructions VZ-9plus³ (103259)
Lock Turntable
Remove the screw from the hole position 2 and
insert it into the specific hole position 1 (maybe the
turntable has to be turned until the thread is
visible).
Use supplied Allen screw driver (2,5mm).
slot for lock
table
(sectional view)
washer 8.4/16x1.6
screw M8x35 or
screw M8x50
attachment
area
2
1
167
[6 5/8"]
185
[7 1/4"]
M8