SHARKOON SATA QuickPort Intern 1-Bay - Handbuch (Seite 2)

www.sharkoon.com
SATA QUICKPORT INTERN 1-BAY
Manual
Features:
•
Lockable internal docking station for 3.5" SATA hard disk drives
• Suitable for one 5.25" PC drive bay
• Fast Swap mechanism for easy HDD handling
• Compatible with SATA I, II and III
• Transfer rate: max. 6 Gb/s
Package content:
•
SATA QuickPort Intern 1-Bay
• 1x SATA data cable
• 1x internal Y power cable
• Set of mounting screws
• Keys
• Manual
Short manual:
1. Switch off your PC and disconnect the power cord.
2. Open the PC case.
3. Remove the 5.25" mounting bay’s front bezel.
4. Slide the docking station into the mounting bay.
5. Attach the docking station from both sides inside the mounting bay using
the included screws.
6. Connect the docking station’s SATA data cable to the respective SATA
connector on the mainboard (for further information also refer to your
mainboard’s manual).
7. Plug the internal Y power cable to the power connectors on the docking
station’s back side and to a matching power connector of your PSU.
Note:
Brand new HDDs (IDE and SATA) used with the QuickPort Intern must be partiti-
oned and formatted. Proceed as described below (e.g. Windows XP):
Start / Settings / Control Panel / Administrative Tools / Computer Management /
Disk Management. Click the respective HDD with the right mouse button and
choose partition/format.