SHARKOON SATA QuickPort Intern Dual-Bay - Handbuch (Seite 2)

www.sharkoon.com
SATA QUICKPORT INTERN DUAL-BAY
Manual
Features:
•
Internal docking station for two 2.5" SATA hard disk drives
• Suitable for one 3.5" PC drive bays
• Fast Swap mechanism for easy HDD handling
• Compatible with SATA I, II and III
• Transfer rate: max. 6 Gb/s
Package content:
•
SATA QuickPort Intern Dual-Bay
• 2x SATA data cable
• 2x internal Y power cable
• Set of mounting screws
• Manual
Short manual:
1. Switch off your PC and disconnect the power cord.
2. Open the PC case.
3. Remove the 3.5" mounting bay’s front bezel.
4. Slide the docking station into the mounting bay.
5. Attach the docking station from both sides inside the mounting bay using
the included screws.
6. Connect the docking station’s SATA data cables to the respective SATA
connectors on the mainboard (for further information also refer to your
mainboard’s manual).
7. Plug the internal Y power cables to the power connectors on the docking
station’s back side and to the matching power connectors of your PSU.
Note:
Brand new HDDs (IDE and SATA) used with the QuickPort Intern must be partiti-
oned and formatted. Proceed as described below (e.g. Windows XP):
Start / Settings / Control Panel / Administrative Tools / Computer Management /
Disk Management. Click the respective HDD with the right mouse button and
choose partition/format.