What to do if, Installing the door and the glass panels – Electrolux EOO3410AAX Benutzerhandbuch
Seite 23
Installing the door and the glass panels
A B C
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite se-
quence.
Make sure that you put the glass panels
(A, B and C) back in the correct se-
quence. The middle panel (B) has a deco-
rative frame. The screen-printing zone
must face the inner side of the door.
Make sure that after the installation the
surface of the glass panel frame (B) on the
screen-printing zones is not rough when
you touch it.
Make sure that you install the top panel in
the seats correctly.
10. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem
Possible cause
Remedy
The hob cooking zones
do not operate.
Refer to the user manual for the hob.
The oven does not heat
up.
The appliance is deacti-
vated.
Activate the appliance.
The oven does not heat
up.
The clock is not set.
Set the clock. Refer to
"Setting the time of day".
The oven does not heat
up.
The necessary settings
are not set.
Make sure that the set-
tings are correct.
The oven does not heat
up.
The automatic switch-off
is on.
Refer to "Automatic
switch-off".
ENGLISH
23